Autonics Photoelectric Sensor, Photoelectric Type BRQT100-DDTA Type_23^Single-Row  N-Type 75 kA at 440 V

75 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 30 A at 50 °C Protection type Short-circuit protectionOverload protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards EN/IEC 60947-1GB/T 14048

Rc (ø20 to ø25) cylinder stroke 30 cylinder stroke 30mm adjustment options A Both ends adjustment unit function options - standard auto switch M9BWL 2-color display

9 17000 22000 14

Square wave noise by noise simulator (pulse width 1 μs) ± 240 V

•Length of the expander segments corresponds to the DVGW requirements

Autonics Photoelectric Sensor, Photoelectric Type BRQT100-DDTA Type_23^Single-Row  N-Type 75 kA at 440 VSensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(4, 2m) Environment_Ambient illumination Sunlight: Max.