4" Steel Hose Mender Camlock Size_ 1 1/4 inch For use up to 175

For use up to 175 PSI (water only) at 70° F

Test Ratings (Water Only)

For high concentrations (up to 300 ppm chlorine) we use CAPTOR NSF with our Combo Kits which feed chemical into where the tablets would normally go

Our double jacket mill hose is for industrial and construction locations where medium water pressure is used

Equivalent part number - HA2520T

4" Steel Hose Mender Camlock Size_ 1 1/4 inch For use up to 175The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or