1 1/2" Steel King Hose Mender for 2 Clamps Male Threads_GHT and allowing the engine to

and allowing the engine to proceed for fire operations

Know exactly how much hose you have

The curved saddle design avoids sharp bends in the hose to increase hose life

Fire hose reducer female adapters comes with a gasket

By placing this straightner between the monitor and nozzle tip it will greatly reduce water turbulence in the monitor

1 1/2" Steel King Hose Mender for 2 Clamps Male Threads_GHT and allowing the engine toThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or